wiki:GcnInstrsSmrd

Version 8 (modified by trac, 8 years ago) (diff)

--

Back to Table of content

GCN ISA SMRD instructions

The basic encoding of the SMRD instructions needs 4 bytes (dword). List of fields:

Bits Name Description
0-7 OFFSET Unsigned 8-bit dword offset or SGPR number that holds byte offset
8 IMM IMM indicator
9-14 SBASE Number of aligned SGPR pair.
15-21 SDST Scalar destination operand
22-26 OPCODE Operation code
27-31 ENCODING Encoding type. Must be 0b11000

Value of the IMM determines meaning of the OFFSET field:

  • IMM=1 - OFFSET holds a dword offset to SBASE.
  • IMM=0 - OFFSET holds number of SGPR that holds byte offset to SBASE.

For S_LOAD_DWORD* instructions, 2 SBASE SGPRs holds an base 48-bit address and a 16-bit size. For S_BUFFER_LOAD_DWORD* instructions, 4 SBASE SGPRs holds a buffer descriptor. In this case, SBASE must be a multipla of 2.

The SMRD instructions can return the resul data out of the order. Any SMRD operation (including S_MEMTIME) increments LGKM_CNT counter. The best way to wait for results is S_WAITCNT LGKMCNT(0).

  • LGKM_CNT incremented by one for every fetch of single Dword
  • LGKM_CNT incremented by two for every fetch of two or more Dwords

NOTE: Between setting third dword from buffer resource and S_BUFFER_* instruction is required least one instruction (vector or scalar) due to delay.

List of the instructions by opcode:

Opcode Mnemonic (GCN1.0) Mnemonic (GCN1.1)
0 (0x0) S_LOAD_DWORD S_LOAD_DWORD
1 (0x1) S_LOAD_DWORDX2 S_LOAD_DWORDX2
2 (0x2) S_LOAD_DWORDX4 S_LOAD_DWORDX4
3 (0x3) S_LOAD_DWORDX8 S_LOAD_DWORDX8
4 (0x4) S_LOAD_DWORDX16 S_LOAD_DWORDX16
8 (0x8) S_BUFFER_LOAD_DWORD S_BUFFER_LOAD_DWORD
9 (0x9) S_BUFFER_LOAD_DWORDX2 S_BUFFER_LOAD_DWORDX2
10 (0xa) S_BUFFER_LOAD_DWORDX4 S_BUFFER_LOAD_DWORDX4
11 (0xb) S_BUFFER_LOAD_DWORDX8 S_BUFFER_LOAD_DWORDX8
12 (0xc) S_BUFFER_LOAD_DWORDX16 S_BUFFER_LOAD_DWORDX16
29 (0x1d) -- S_DCACHE_INV_VOL
30 (0x1e) S_MEMTIME S_MEMTIME
31 (0x1f) S_DCACHE_INV S_DCACHE_INV

Instruction set

Alphabetically sorted instruction list:

S_BUFFER_LOAD_DWORD

Opcode: 8 (0x8)
Syntax: S_BUFFER_LOAD_DWORD SDST, SBASE(4), OFFSET
Description: Load single dword from read-only memory through constant cache (kcache). SBASE is buffer descriptor.
Operation:
SDST = *(UINT32*)(SMRD + (OFFSET & 3))

S_BUFFER_LOAD_DWORDX16

Opcode: 12 (0xc)
Syntax: S_BUFFER_LOAD_DWORDX16 SDST(16), SBASE(4), OFFSET
Description: Load 16 dwords from read-only memory through constant cache (kcache). SBASE is buffer descriptor.
Operation:
for (BYTE i = 0; i < 16; i++) SDST[i] = *(UINT32*)(SMRD + i*4 + (OFFSET & 3))

S_BUFFER_LOAD_DWORDX2

Opcode: 9 (0x9)
Syntax: S_BUFFER_LOAD_DWORDX2 SDST(2), SBASE(4), OFFSET
Description: Load two dwords from read-only memory through constant cache (kcache). SBASE is buffer descriptor.
Operation:
SDST = *(UINT64*)(SMRD + (OFFSET & 3))

S_BUFFER_LOAD_DWORDX4

Opcode: 10 (0xa)
Syntax: S_BUFFER_LOAD_DWORDX4 SDST(4), SBASE(4), OFFSET
Description: Load four dwords from read-only memory through constant cache (kcache). SBASE is buffer descriptor.
Operation:
for (BYTE i = 0; i < 4; i++) SDST[i] = *(UINT32*)(SMRD + i*4 + (OFFSET & 3))

S_BUFFER_LOAD_DWORDX8

Opcode: 11 (0xb)
Syntax: S_BUFFER_LOAD_DWORDX8 SDST(8), SBASE(4), OFFSET
Description: Load eight dwords from read-only memory through constant cache (kcache). SBASE is buffer descriptor.
Operation:
for (BYTE i = 0; i < 8; i++) SDST[i] = *(UINT32*)(SMRD + i*4 + (OFFSET & 3))

S_DCACHE_INV

Opcode: 31 (0x1f)
Syntax: S_DCACHE_INV
Description: Invalidate entire L1 K cache.

S_DCACHE_INV_VOL

Opcode: 29 (0x1d) for GCN 1.1
Syntax: S_DCACHE_INV_VOL
Description: Invalidate all volatile lines in L1 K cache.

S_LOAD_DWORD

Opcode: 0 (0x0)
Syntax: S_LOAD_DWORD SDST, SBASE(2), OFFSET
Description: Load single dword from read-only memory through constant cache (kcache).
Operation:
SDST = *(UINT32*)(SMRD + (OFFSET & 3))

S_LOAD_DWORDX16

Opcode: 4 (0x4)
Syntax: S_LOAD_DWORDX16 SDST(16), SBASE(2), OFFSET
Description: Load 16 dwords from read-only memory through constant cache (kcache).
Operation:
for (BYTE i = 0; i < 16; i++) SDST[i] = *(UINT32*)(SMRD + i*4 + (OFFSET & 3))

S_LOAD_DWORDX2

Opcode: 1 (0x1)
Syntax: S_LOAD_DWORDX2 SDST(2), SBASE(2), OFFSET
Description: Load two dwords from read-only memory through constant cache (kcache).
SDST = *(UINT64*)(SMRD + (OFFSET & 3))

S_LOAD_DWORDX4

Opcode: 2 (0x2)
Syntax: S_LOAD_DWORDX4 SDST(4), SBASE(2), OFFSET
Description: Load four dwords from read-only memory through constant cache (kcache).
Operation:
for (BYTE i = 0; i < 4; i++) SDST[i] = *(UINT32*)(SMRD + i*4 + (OFFSET & 3))

S_LOAD_DWORDX8

Opcode: 3 (0x3)
Syntax: S_LOAD_DWORDX8 SDST(8), SBASE(2), OFFSET
Description: Load eight dwords from read-only memory through constant cache (kcache).
Operation:
for (BYTE i = 0; i < 8; i++) SDST[i] = *(UINT32*)(SMRD + i*4 + (OFFSET & 3))

S_MEMTIME

Opcode: 30 (0x1e)
Syntax: S_MEMTIME SDST(2)
Description: Store value of 64-bit clock counter to SDST. Before reading result, S_WAITCNT LGKMCNT(0) is required.
Operation:
SDST = CLOCKCNT